Author Archives: Kenneth R. Johnson

Heater Problems & Their Easy Solutions

Published / by Kenneth R. Johnson / Leave a Comment

You might require troubleshooting issues connected to water heater or need to repair your water heater. Problems connected to water heaters are normally self-evident.

For instance, if a hot water faucet does not summon hot water, puddling or dripping is noticeable close to the water heater; or, strange noises emerge from the tank.

Below is professional advice for DIY repair and water heater troubleshooting.

The Best Way to Deal with Heater Problems

Even though some firms for gas utility will provide solutions with a gas supply of water heater, they will not repair other water heater issues. You can either fix it personally or you summon an expert to repair it.

Summoning an expert entails waiting for one day or more, without hot water and afterwards paying a huge repair bill. As a result, it assists to be aware of how to personally solve basic outages.

Water Heater Troubleshooting – Lack of Hot Water

In regard to a water heater, a complaint that is most common is that it fails to heat water at all. As electric water heaters and gas water vary a lot, repairing a water heater is determined by the kind. A gas water heater consists of a burner at the base and at the top, a flue; a huge electrical hookup powers the electric one.

Insufficient Hot Water or Extremely Hot Water

Two issues that are most prevalent with hot water heaters are that they emit water which is either insufficiently hot or extremely hot.  Prior to you taking any other step, regulate the dial for temperature on the water heater’s front.

Wait for some time and then check the temperature of the water at a faucet. However, if regulating the temperature dial is not effective, attempt the methods below for troubleshooting.

Insufficient Hot Water

A water heater which is undersized is normally to blame if it appears as if you always have insufficient hot water in your residence. In case this is a recurrent issue, or your needs have increased for hot water and a huge new soaking tub has been installed or a shower head of high-flow, it is possible that you shall require to obtain a water heater which is new and larger.

Ensure you check tankless water heaters as with this kind, you never lack hot water. But, if of late, you have had sufficient hot water but all of a sudden your water heater appears to supply reduced hot water, first check the water heater’s dial as mentioned earlier. After this, follow the troubleshooting advice for water heater.

Note that in case there is a significant drop in outdoor temperature, your water heater is forced to work a lot harder to heat and sustain the cold inbound water. The water undergoes more heating since it travels via pipes which run via unheated spaces.  So, it is necessary for the water heater to be adjusted to a temperature which is slightly hotter.

You should also ensure that there is no leakage on your water heater. Examine its base for indications of water. In case none of these two are the issue, to get the mineral deposits out flush the water heater tank. These lower the efficiency of the heater.

Common Devices Used for the Prevention of Backflow

Published / by Kenneth R. Johnson / Leave a Comment

At times, foreign objects go inside the clean water. This is an occurrence known as backflow that may arise because of a “huge rate of pressure in one area of use, or a harmful pressure in the water line” according to an experienced company in Lakeland, Florida.

Backflow prevention is essential to keep the water supply away from any kind of contaminants. Any home or building structure needs to have the suitable systems for backflow prevention to prevent any damages arising from contaminated water supply.

Different Devices for Preventing Backflow

A lot of devices are present, which are used in backflow prevention systems. Each of these devices carries out the same work; however, the kind of devices to be utilized shall be determined by the water circumstance to be prevented.

Atmospheric Vacuum Breaker

The device called atmospheric vacuum breaker is formed, similar to an elbow and curved at right angles. A valve which is kept inside the device stops the backflow. This system relies on the pressure. This device should be mounted at least 6 inches from the location of the downstream.

A Chemigation Valve

A chemigation valve presents a device used in agricultural regions. In these agricultural areas, the device works to prevent water from being contaminated with pesticides, fertilizers as well as other toxic chemicals. Other components are found inside the valve.

A flapper is operated with the use of a spring, in a check valve which prevents water from flowing in one direction. The device might also have pressure drain and vacuum release. An injection port presents the device’s final component, which makes the chemicals go downwards.

A hydrostatic lock comprises of numerous pipes bringing together a vertical building. The loop needs to be placed overhead (33 feet or more) in order for the system to work appropriately and avoid siphonage and backflow inside the water line.

Double-Check Valve

Normally, a double-check valve is found in systems such as lawn or fire sprinklers. On every end, there is a gate or valve gate that is assembled. The device facilitates isolation and testing. This valve also enables normal and reverse flow.

RPZD

The device RPZD is used in zones with low pressure. This device is very efficient in preventing contamination of the water supply and is meant to handle dangers found in high leveled areas.

These dangers are known to create severe harm on people. There are areas where this device should be tested by an expert technician each year, at least once.

A chamber is found between the device’s divided check valves where pressure monitoring is carried out. The extreme rate of pressure shall be released via another drain.  The chamber where monitoring of pressure is done is retained at a lower pressure, compared to the one of water supply.

Air Gap

This device is mainly present in a lot of homes. In the faucet of the home, an air gap is found between the faucet head and sink. During winter season, it is suggested that homeowners should turn the faucet on at night.

The flowing water assists to avoid it from becoming frozen. Water which is frozen and expanded will possibly lead to bursting of the pipes. There is relief of pressure also, since water is permitted to flow to a specific region as pressure begins to accumulate, triggered by the water’s partial freezing.

Effective Method to Clear a Drained Floor

Published / by Kenneth R. Johnson / Leave a Comment

A floor drain is found on your home’s floor in the utility areas like basement, garage and laundry. This problem is normally ignored and many times does not attain the consistent cleaning it requires for optimal performance.

It swallows all types of grime and sludge, such as runoff from machines; sand, dirt and melted snow from your vehicle as well as hair, soap scum and lint found in the washing machine.

At times, a clog is caused by an overload that can lead to flooding or water backup. This kind of plumbing emergency needs instant attention of the appropriate kind. Keep away from commercial drain cleaners that are caustic; they can corrode your pipes, making your problem worse than before.

You can utilize the options below instead:

Plunger

Almost each householder has a tool called plunger; the ones who do not have it should really obtain one! Use petroleum jelly to smear the plunger’s edge to facilitate a great seal. After this, use force to depress the plunger numerous times.

Soda and Vinegar

For this procedure that involves various steps, you require:

  • Rubber gloves
  • Phillips screwdriver
  • Waterproof container which is disposable, for collecting gunk
  • Old toothbrush
  • Baking powder (1-1b box)
  • Bottle of vinegar (32-oz)
  • Boiling water

Procedure

  1. Utilize a Phillips screwdriver to take out the screw which firmly grips the drain cover. (To avoid the screw being misplaced, stash it carefully). Wear rubber gloves then lift the cover up. Wipe beneath.
  1. Reach inside the drain to eliminate gunk, using your hands. Get rid of it in the available container.
  1. Use the toothbrush to scrub, to eliminate sediment or fixed dirt.
  1. Pour boiling water (a quart) inside the opening of the drain and allow it to saturate for 10 minutes.
  1. Use all the baking soda inside the box to sprinkle the drain in an attempt to allocate it evenly.
  1. Follow up with white vinegar (bottle of 32-ounce). Mixed with the baking soda, it shall fizz up, forming a strong cleaning action.
  1. Again, allow everything to rest for 10 minutes. After this, flush slowly using extra quart of water which is boiling.
  1. Return the drain cover.

Expert Plumbers and Top Notch Tools

In case the method above is not effective, you can think of engaging an expert plumbing service. On average, the cost of drain cleaning is around $150; this may be a good idea, so as to get this problem off your hands.

Expert plumbers have the skills to diagnose the blockage’s cause, fast and with accuracy. After this they can select the most ideal tools to offer a solution to this issue, using their stock of equipment which is high tech, such as fiber optic cameras which enable them to have an interior view of the plumbing in your home, strong electric augers or Roto-Rooters and hydro-jetters. These effectively attack drain clogs with streams of water which have high-pressure.

Conclusion

You should however, not wait for an emergency, in regard to plumbing. Shrewd homeowners ensure their drains are expertly cleaned every 3-5 years, as a section of their preventive maintenance schedule.